Bore and Hone Cast Cylinder: | $90 |
---|---|
Power Valve Service: Includes inspection, cleaning and assembly |
$95 |
Top End Rebuild: Disassemble top end, inspect gasket surfaces, plating and reeds. Hone cylinder, set ring end gap and assemble. Add $60 if engine is still in bike. Add $50 if I have to power wash it first! |
$275 |
Crank Case Rebuild: Inspect and clean lower engine components including transmission and crankshaft. Reassemble. Does not include parts. |
$400 |
Crankshaft Rebuilds: Assembled with custom, state of the art jig. Does not include parts. Add $15/each for main bearing removal |
$110 |
Cylinder Replating Service: Strip, replate, chamfer all ports and diamond hone. Includes power valve service. |
$300 |
Cylinder Porting: Custom porting to fit your riding style. |
$150 - $350 |
Head Machining: Set squish velocity, combustion chamber and lap gasket surfaces. |
$60 - $90 |
Broken Case Repair: Most jobs are $150 |
Call for Quote |
Case Matching: Match cases to transfer ports for maximum air flow. |
$100 |
Carburetor Inspection and Cleaning: Does not include parts. | $95 |
Crankshaft Balancing | Call for Pricing |
Case Trenching: | $125 |
Remove Broken Bolt: | $25-$40 |
Bore and Hone Cast Cylinder: | $90 |
---|---|
Valve and Seat Machining: See Below | |
Cut Valve seats, 3 angle: | $30 each |
Cut Valve seats for Oversize Valves: | $45 each |
Install New Valve Guides: Includes Seat Machining |
$80 each |
Top End Rebuild: Complete disassembly and inspection of cylinder head, cylinder and all components. Inspect piston, rings and set valve lash. Add $60 if engine is still in bike. Add $50 if I have to power wash it first! |
$350 |
Four Stroke Crankcase Rebuilds: Includes disassembly, cleaning, inspection and assembly of entire lower end. Does not include parts. |
$400 |
Crankshaft Rebuilds: Assembled with custom, state of the art jig. Does not include parts. |
$110 - $150 |
Cylinder Replating Service: Strip, replate, chamfer all ports and diamond hone. |
$275 |
Cylinder Porting: Custom porting to fit your riding style. |
$225 - $350 |
Reface Cylinder Head: | $60 - $90 |
Broken Case Repair: Most jobs are $150 |
Call for Quote |
Valve Adjustment: Does not include parts. |
$75 |
Carburetor Inspection and Cleaning: | $95 |
Crankshaft Balancing | Call for Pricing |
Remove Broken Bolt: | $25-$40 |